Australian Owned and Operated Since 1946.

Find your closest Wilson Fishing outlet...


Or Postcode:

Your Location:

SEARCH OUR SITE:

Home » Fishing-Tips-Techniques » Product-News-and-Views » Treble Talk


Related Products...

  • TREBLES

    A standard for lures, the range of treble hooks is first class.

Must Have Mustad

By Stephen Booth

Retrofitting lures with new trebles and split rings is something that all anglers will do at some stage.

These days, the number of quality products on the tackle store shelves to do this is almost endless and there really is no longer any reason to simply put 'whatever-hook-you-have' on your lures

But recommending the right treble is not the point of this article, the point (pun absolutely intended) is to get you all thinking about the impact changing trebles and rings on your lures can have. Do it wrong and you can change your best lure into your worst lure. Do it right and you can change the worst lure into, probably the same worst lure, but with better hooks.

Weight

I've spoken to many lure makers over the years and I always like to talk about weight and how it impacts on their lures. With the big, robust cod-style lures, weight is rarely a governing factor in hook choice, but as the lures get smaller and more 'finesse' the importance of keeping the weight in and around the right area increases in importance. And once you start talking about suspending lures, that weight is critical.

The problem with many imported lures is that they are not ready to be fished in Australia. It's common knowledge that for fish like barra, the lure's hooks, and especially rings, need to be right or else failures will occur. This is not necessarily the hook's or split ring's fault, but is more likely the result of the angler having an expectation beyond the capabilities of the terminal gear being used. You bought the lure, so you need to make sure it can handle the pressure.

One of my favourite jack lures comes with pretty good hardware for average use. If I am using 20lb braid and a 30lb leader I will not change out the rings and hooks. But if I am fishing this lure on heavier tackle, say 30lb braid and 45lb leader, the poor old terminal tackle comes up a bit short. This is not the fault of the lure, but rather the fact that I am fishing drags and lines way too heavy for the lure to withstand. But, this is a suspending lure and changing hooks and rings out is fraught with drama. Too much weight sees this lure turn instantly into a sinker, and while that in and of itself is not necessarily a bad thing, it does change the lure's characteristics.

Another lure that I love using for golden perch and Murray cod in my beloved Mulwala is the Custom Crafted Extractor. This lure is dynamite and can handle a lot of extra weight and still float and fish really well. However, in recent times, my good mate Marc Ainsworth has been playing around with his Extractors and has found a way to actually lighten up the lure and turned it into an even more deadly lure.

Here's how he does it.

Marc will remove the front split ring and tie directly to the lure's tow point with a loop knot. This is a key factor. The trebles are removed and replaced with Mustad KVD hooks and the split rings remain the same. This process actually lightens up the lure and we both believe it gives the lure a stronger action. When we golden perch fish, speed is often super critical and these mods allow the lure to swim harder at slower speeds by actually lightening up the whole rig. The Mustad KVD trebles are 1x strong - plenty strong enough for golden perch and Murray cod up to the 75-80cm mark when fished on 20lb braid and a 4-6kg rod.

Strength

The strength of the treble is probably the main reason we change out trebles on lures. More often than not we are looking at increasing the strength so that we can fish heavier lines to keep hard fighting fish out of the snags.

The strength of a treble is a little bit misunderstood generally speaking. A 2x hook in one pattern is never the same strength as a 2x hook in another pattern, even from the same manufacturer. The designations of 1x, 2x, 3x, 4x and so on simply represent the number of times stronger that treble is than the standard hook of that pattern. This is important to understand so that you do not have higher expectations of the hook's strength than it actually has. The 1x is perhaps the most misunderstood with these hooks being 1 times stronger than the standard hook (roughly twice as strong).

Additionally, a small 4x treble is never as strong as a large 4x treble of the same pattern. Again the treble will be 4x stronger than the standard treble of the same size and pattern. This often trips people up who expect that 4x treble in 2/0 to be as strong as the 4x treble in 6/0. They will not be the same strength. If you fish a lure rigged with 4x 6/0 trebles on 50lb line, you'll likely get away with it on just about any species, however, if the same line is used on 4x 2/0 trebles, you'll likely straighten them out if you fish the same drag and hook the same sized fish.

For fish like barramundi this is critical. Barra don't fight as hard as say a GT, but the strength they possess in their jaws is extraordinary and this is where split rings rip apart and trebles lose tines or open up. Unfortunately, sometimes it is trial and error if you are doing your own research and you are always fighting the battle between strength and hook set ability as the stronger the treble is, generally the thicker the metal and the harder it is to penetrate and get a solid hook up.

Penetration

Here's a further thing to consider. Penetration of the hook point is vital to securing a fish. If the hook point does not penetrate, then you're wasting your time even fishing the lure.

Fine, and consequently lighter and weaker hooks penetrate far more easily than thicker and more robust hooks. Finer hooks can be fished on lighter rods and with lighter lines as the power needed to get penetration is small when compared to the power needed to gain penetration with a 7x treble.

So not only do you need to consider how the trebles impact the lure's action, you also need to consider what tackle you are using to chase the fish. Heavier gauge hooks require a rod capable of driving them home, which generally means thicker tips and heavier line classes.

You also need to think about what happens once the hook has penetrated? How your tackle choice will impact on the treble's performance during the fight? It's easy to get a 2x treble to drive home in a barra's mouth on 50lb braid, but keeping that treble from straightening is going to be a tough gig on heavy braid.

The hook point shape is also a major consideration in penetration. A cone or needle point hook tends to penetrate more easily than a knife edge hook point as there is less friction. Try this test at home with a piece of paper and you'll see for yourself. The important part in all this is that if the hook only partially penetrates, then the leverage on the hook point is increased and it's far easier to bend out the hook. It's also easier to bend or break the hook point. Both these situations can lead to lost fish. You can also try this at home. Grab a pair of pliers and bend a hook from the point above the barb. Next, do the same from just above the bend and see the difference. Hook penetration is vital.

A world of compromise

There is no one treble that will suit all needs and situations. If you're anything like me you'll find yourself connected to exactly the right fish on exactly the wrong tackle and with the wrong terminals. It's Murphy's Law! Please don't blame the trebles or rings when they fail in these situations, just do what you need to do to get the fish in the net.

You may ask what's my favourite treble? At the moment the Mustad 4x Saltism is my favourite treble, although the KVD trebles are quickly gaining the love. The Saltism trebles are light and tough and come in a size range that covers most of my needs. It's not the be all and end all though, but I will fish these trebles on anything from 20lb braid up to 50lb braid and be confident they'll handle the pressure.

Like everything in fishing, retrofitting lures is a compromise. There is a lot to think about and you will get it wrong at times; that egg on my face look my fishing mates know so well keeps raising its ugly head. Luckily though these instances are becoming fewer and fewer as we discover a retrofit combination that works for us.

The Treble Range

Chemically Sharpened    
Model Strength Size Range
35657 Bream Treble Std 14-10
KVD Elite TG76 1x 8-1
UltraPoint 36329 3x 4-2/0
TG77 3x 14-1
Saltism 36330 4x 6-2/0
Kaiju 36328 7x 3/0-7/0
Duratin    
Model Strength Size Range
7794 DS 3x 8-4/0

Some Popular Lures

Lure Treble Choice
Custom Crafted Extractor Mustad KVD Elite TG76 1x size 2
Gidgee Lures Fatty Junior  Mustad Saltism 4x size 4
StumpJumper No. 1 Mustad 36329 UltraPoint 3x size 3/0
Zerek Gianty Ruby Mustad KVD Elite TG76 size 2
Zerek Tango Shad 50mm Mustad 35657 Bream Treble size 10

All web site content is © of L Wilson & Co Pty Ltd. Some product appearance may vary from the images shown herein.